Kyocera FS-2000D Advanced Operation Manual page 34

Using the Operation Panel
Keys
2-8
The operation panel keys are used to configure the printer operation. Note
that certain keys have a secondary function.
NOTE:
The printer has a parallel, USB, network, and an optional
interface. Configuration of the printer settings affect only the interface that
is currently active (shown by the INTERFACE indicator on the message
display). Refer to Interface Indicator (INTERFACE) on page 2-5
GO Key
GO switches the printer between on-line and off-line. Use this key to:
• Toggle the printer's on-line and off-line states. You can temporarily
stop the print job by switching the printer off-line.
• Print and feed out one page when the printer displays Waiting.
• Recover from certain errors.
• Recover from Auto Sleep.
(Cancel) Key
This key is used to:
• Cancel a printing job.
• Stop the alarm sound.
• Reset numeric values or cancel a setting procedure while using menu
system.
1 While the printer displays Processing, press [Cancel].
Print Cancel? appears on the message display followed by the
interface in use. The interface is indicated by one of the following message:
Parallel
USB
Network (FS-3900DN/FS-4000DN only)
Serial (option serial interface)
Option (option network interface)
2
Press [OK]. Cancelling data appears on the message display and
printing stops after the current page is printed.
Menu Key
Menu lets you enter the menu system to change the setup and printing
environment of the printer.
Pressing this key during a menu selection will terminate the selection and
return the printer to the normal operation.
ADVANCED OPERATION GUIDE
.