Fujitsu ETERNUS LT160 User Manual page 115

2) Select the [target ID] button.
3) Select the connected adapter number
4) Select the topology.
5) If the AL connection is selected, specify the Addressing mode.
C144-E072-01EN
Figure 4.22 Selecting the [Target ID] button
SETUP menu
-Host I/F
-Target ID
+Adapter#0
+Adapter#1
- For Fabric connection, select the [Fabric] button.
SETUP menu
-Host I/F
-Target ID
-Adapter#1
+Fabric
- For AL connection, select the [FC-AL] button.
SETUP menu
-Host I/F
-Target ID
-Adapter#2
+FC-AL
"Fabric" is set by default.
4.5 Setting Library Information
Remarks:
4-29