Unloading A Cartridge Loaded From The Magazine - Fujitsu ETERNUS LT160 User Manual

Operator Panel Operation
6) A confirmation message window is displayed.
7) A message indicating that processing is under way is displayed on the screen. If the
4.7.2

Unloading a cartridge loaded from the magazine

A cartridge in the drive loaded using the Load/Unload menu is unloaded into the
specified magazine.
1) Select the [Load/Unload] button from the OPERATION menu.
2) Specify a drive to be unloaded (more than one drive may be specified).
3) Specify the magazine to be unloaded.
4) A confirmation message window is displayed.
5) A message indicating that processing is under way is displayed on the screen. If the
4-42
Select the [OK] button if it is OK to proceed. Selecting the [CANCEL] button
displays the drive designation window.
display changes to an end message, loading to the specified drive is completed.
If no load/unload operation was performed using the Load/Unload
menu before, this unload operation cannot be performed.
Data loss:
If a drive is used for the load/unload operation, the drive cannot be
used from backup software.
Be sure to stop the operation of backup software before performing
the load/unload operation.
OPERATION menu
+Load/Unload
OPERATION menu
-Load/Unload
-DRV#00
-DRV#01
+MGZ#0
+MGZ#1
Select the [OK] button if it is OK to proceed. Selecting the [CANCEL] button
displays the magazine selection window.
display changes to an end message, unloading from the specified drive is completed.
Remarks:
CAUTION
C144-E072-01EN