Table of Contents
Advertisement
The following information about all adapters is displayed:
Adaptor Card
Status
I/F Type
Topology
Addressing Mode
LOOP ID
Acceptable Host
World Wide Port
Name
World Wide Node
Name
World Wide Port
Name
C144-E072-01EN
Display item
Indicates the installation status of the host interface:
-
-
Indicates the status of host interface:
-
-
-
Displays the type of interface.
Displays the connection form Fablic or FC_AL.
Displays the addressing mode (Hard or Soft).
(If Topology is FC_AL)
Indicates LOOP ID (If Addressing Mode is Hard).
Displays up to eight WWPN of the Host permitted by the
host interface. If not set, "All Host" is displayed.
Displays WWNN of the host interface.
Displays WWPN of the host interface.
5.3 Referencing Library Information
Explanation
If installed, "Installed" is displayed.
If not installed, "Not Installed" is displayed.
If operating normally, "Normal" is displayed.
If the FC cable is disconnected, "Not Connect" is
displayed.
If an error occurred, "Error" is displayed.
5-21
Advertisement
Table of Contents
Troubleshooting
