Setting The Host Wwpn Permitted For Each Adapter (If Needed) - Fujitsu ETERNUS LT160 User Manual

7) A confirmation message window is displayed.
8) A window indicating that processing is under way is displayed. When the processing

4.5.1.2 Setting the host WWPN permitted for each adapter (If needed)

Set the WWPN to which access is permitted for each adapter. Up to eight hosts can be
permitted for each adapter.
1) Select the [Host WWPN] button.
2) Select the connected adapter number.
3) Set the permitted host WWPNs for the specified adapter.
C144-E072-01EN
Select the [OK] button if it is OK to proceed. Selecting the [CANCEL] button
displays the previous window.
is completed, a window that requests to restart the library is displayed (*1).
*1 To enable setup values, the library needs to be restarted.
If no host WWPN is set, all hosts can be accessed.
If a host WWPN is set, access is permitted to the setup host only.
Figure 4.24 Selecting the [Host WWPN] button
SETUP menu
-Host I/F
-Host WWPN
+Adapter#0
+Adapter#1
- Select the host WWPN from the list.
Select the [List] button to display a list of registered WWPNs. Select the host
WWPNs from this list.
4.5 Setting Library Information
Remarks:
4-31