Power-On And Power-Off; Power-On Method; If Rci Is Not Used; If Rci Is Used - Fujitsu ETERNUS LT160 User Manual

2.4

Power-on and Power-off

2.4.1

Power-on method

Press the power switch on the back panel to turn on the library or drive. The power-on
method depends on whether RCI is used.

2.4.1.1 If RCI is not used

Turn on the power switch located on the back panel on the rear of the library.
ON state

2.4.1.2 If RCI is used

If RCI is used, the host controls power-on. For more information, see the server manual.
C144-E072-01EN
Power switch

Figure 2.4 Power switch (power-on)

If you turn on or off the power using RCI, the power switch of the
library must be set to ON.
2.4 Power-on and Power-off
Remarks:
2-7