Referencing Alarm Error Information; Referencing The Version Number Of The Library/Drive - Fujitsu ETERNUS LT160 User Manual

Operator Panel Operation

4.3.6.3 Referencing alarm error information

1) If the [Alarm List] button is selected, contents about alarms that occurring currently
4.3.7

Referencing the version number of the library/drive

It is possible to reference the version number of firmware/hardware of the library/drive.
1) Select the [F/W Version] button from the INFORMATION menu.
2) The following library/drive information is displayed:
4-24
are displayed (If no alarm is currently detected, the [Alarm List] button cannot be
selected.).
INFORMATION menu
-Error Log
+Alarm List
The Library Alarm icon is also displayed on the operator panel if the
FC cable of the FC card that is inserted in the library is not connected.
In this case, FC Link Failure is listed on the alarm list. When the FC
cable is connected, the Library Alarm icon is no longer displayed.
INFORMATION menu
+F/W Version
- Library
-- Version of Overall Library
-- Version of Library Control Firmware
-- Version of Library Servo Firmware
-- Version of Library Control Hardware
-- Version of Library Servo Hardware
- Drive module
-- Version of Overall Drive Module
-- Version of Overall Drive Control Firmware
-- Version of Drive Unit Firmware
Remarks:
C144-E072-01EN