Fujitsu ETERNUS LT160 User Manual page 39

1.1 Device Configuration
Notes:
The magazine is tilted while pushing it into CAS so that it rests on the
positioning projection (Figure 1.10). If the magazine is pushed
further, it is completely over the positioning projection (Figure 1.11).
This state in which the magazine is pushed in completely is its regular
position. Always push the magazine into this position. The external
door is constructed so that it cannot be closed if the magazine is not in
its regular position.
Figure 1.10 Magazine insertion method 2
C144-E072-01EN 1-13