QMS 2060 Getting Started page 80

2 Install the appropriate printer description file(s) for your
application from the PSExec folder:
If you use Adobe Separator, install the PPD file in the
Printer Descriptions folder.
If you use Adobe PageMaker 5. x , install the version 4. x
PPD in the Printer Descriptions folder.
If you use Macromedia FreeHand 4. x , install the version 4. x
PPD in the Printer Descriptions folder.
If you use QuarkXPress 3.3 or later, you can use the QMS
2060 PPD. However, if you use an earlier version, install
the QMS 2060 PDF in the QuarkXPress folder in the PDF
folder. To select the PDF, go to Quark's Page Setup dialog
box. Under Printer Type, select the QMS 2060 PDF and
select the Use Printer Default Screen Angles checkbox. Also
in Quark's Page Setup dialog box, make sure None is
selected for the EFI Color profile option.
Your now ready to print from your Macintosh. From this point, you'll
probably perform most printing tasks from your application. For spe-
cific information, check the printing section in your application docu-
mentation.
For information on print media types and sizes, see chapter 2, "Print
Media," in the Reference guide.
If you use an Aldus application (or one that used to be owned by
Aldus, such as PageMaker or FreeHand), when you want to print,
hold down the Option key while selecting Print from the File menu.
This brings up the LaserWriter windows, which contains the QMS
printing options. Normally, Aldus applications bypass LaserWriter and
use an Aldus printer driver, which prevents you from accessing QMS
printing options.