QMS 2060 Getting Started page 40

CrownCopy logo, if CrownCopy is installed.
ImageServer logo, if ImageServer is installed.
Type of paper in each input bin.
All installed printer options.
All standard and optional interfaces
Note: When a font SIMM is installed, the following appears in the
»
Options section of the start-up page even though you have only one
installed:
%cartridge1%
%cartridge%
Remember that the serial interface is an option which must be pur-
chased through your QMS vendor. See appendix A, "QMS Customer
Support," for a list of locations and telephone numbers.
If you purchased any printer options, such as extra memory (SIMMs),
emulations, a network interface card, or an internal hard disk, then
install them now. If installation instructions are included with the
option, follow them. If not, installation instructions are included in the
Options guide.
Note: Remember to turn off the printer before you install an option.
»
Now that you've set up your printer, go to chapter 3, "Connecting to a
PC," chapter 4, "Connecting to an Ethernet Network," or chapter 5,
"Connecting to a Macintosh."