QMS 2060 Getting Started page 53

8 Select the QMS 2060 printer, then choose OK.
If Windows does not ask for an updated driver, the QMS 2060
printer appears in the list of installed printers.
If Windows asks for an updated driver, place PageMaker
disk #6 in the disk drive, then type the letter of that drive.
9 Choose OK.
The name of the printer appears in the list of installed printers.
PPD files are also to be used with PageMaker 5.0. They were copied
into the PPD subdirectory of the QMS Level 2 Windows driver direc-
tory during the installation process. They should be stored in the
\ALDUS\USENGLISH\PPD4 directory. This directory is typically found
in the \WINDOWS directory, but PageMaker allows you to install it
anywhere on your system.
If you're not sure where the \ALDUS directory is, open Windows
Explorer, and search (the File menu) for "aldus" starting from the C:\
directory. Make sure you select "Search All Subdirectories."
This application won't print EPS (Encapsulated PostScript) images if
the PostScript driver isn't PSCRIPT.DRV.
This application provides a feature to control whether a PostScript
driver is actually treated as a PostScript driver or not. In the COREL-
PRN.INI file under the [PSDRIVERS] section, specify which driver by
either of the following statements:
QMSPS=1
QMSPS=0
Other versions of CorelDRAW may also require special setup. Check
your CorelDRAW documentation for more information.
(PostScript driver)
(Non-PostScript driver)