QMS 2060 Getting Started page 64

the print server name to end the name. For example, the print
server name
FIRSTGROUP_GROUPS_BLUE_TEAM_TEAMS_CRC_QMS
is 42 characters long, and must be entered as follows:
PSERVER NAME[1]
FIRST_GROUP_GROU
PSERVER NAME[2]
PS_BLUE_TEAM_TEA
PSERVER NAME[3]
MS_CRC_QMS<space>
where <space> is the space character.
5 Reset the CrownNet interface by using the Administration/
Communications/Network2/CrownNet/Common/Soft Reset
menu.
6 You're now ready to print.
From this point, you'll probably perform most printing tasks from
your application. For specific information, check the printing sec-
tion in your application documentation.
For information on print media types and sizes, see chapter 2,
"Print Media," in the Reference manual .
Unless you want to use the default settings, use the following proce-
dure to name the file and print servers. These names must be unique.
» Note: In CrownAdmin, the printer shows up as QMS-xxxx-Print-
System-hardwareaddress, where xxxx is the printer model
number and hardwareaddress is the printer's hardware address as
found on the printer start-up page.