1. Manuals
  2. Brands
  3. QMS Manuals
  4. Printer
  5. 2060
  6. Getting started

QMS 2060 Getting Started

Print system
Hide thumbs Also See for 2060:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation, Reference
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2060 and is the answer not in the manual?

Questions and answers

Related Manuals for QMS 2060

Summary of Contents for QMS 2060

  • Page 1 ®...
  • Page 2 The following are tradem ar ks or registered trademarks of their respective owners. Other pr oduct names mentioned in this manual may also be trademarks or registered trademarks of their respective owner s. Register ed tradem ar ks are registered in the United States Patent and Trademark Office;...
  • Page 3 About the Printer ... 1-2 Printer Configurations 1-2 About the Documentation ... 1-3 Standard Product Documentation 1-4 Related Documentation 1-6 Manuals on the CD-ROMs 1-7 About This Manual 1-9 Typographic Conventions 1-10 What's Next? ... 1-11...
  • Page 4 Introduction ... 2-2 Finding a Good Location ... 2-2 The Printer Must Be Placed... 2-2 Power Requirements 2-4 Checking Shipment Contents ... 2-5 Shipment Contents 2-5 Media 2-6 Registering the Printer ... 2-6 Unpacking the Printer ... 2-6 Installing a Toner Cartridge ... 2-7 Loading the Media Cassette ...

  • Page 5: Table Of Contents

    PC Printing Software ... 3-5 Installing a PostScript Printer Driver 3-6 Installing a QMS Level 2 Windows Driver 3-7 Notes on Installing Printer Description Files 3-11 Printing from the PC ... 3-15 If You Have Trouble ... 3-15 What's Next? ... 3-15 Introduction ...
  • Page 6 Macintosh Printing Software ... 5-2 Installing Macintosh Utilities 5-3 Installing Macintosh Printer Drivers 5-4 Installing the QMS GX Driver 5-4 Installing the QMS 2060 PPD 5-8 Printing from the Macintosh ... 5-10 If You Have Trouble ... 5-11 What's Next? ... 5-11 Introduction ...
  • Page 7 Sources of Support ... A-2 Your QMS Vendor A-2 Your Application Vendor A-2 Q-FAX A-2 The QMS Corporate Bulletin Board System A-3 CompuServe A-3 Internet A-3 QMS Customer Response Center (CRC) A-4 QMS World-wide Offices ... A-5 Introduction ... B-2 Menu Chart Conventions B-2 Installation Menu B-3 Operator Control Menu B-4...

  • Page 9: About The Printer

    “About the Printer” on page 1-2 “About the Documentation” on page 1-3 “What's Next?” on page 1-11...
  • Page 10 The QMS 2060 Print System is a powerful, but easy-to-use 20-page- per-minute monochrome laser printer offering The next-generation Crown operating system High-performance processing Innovative network features Flexible emulations support Toner conservation and energy efficiency An assortment of printer fonts The printer comes in four configurations: BX, GX, FX, and EX.
  • Page 11 Note: Two other configurations are also available: the QMS 2060 IS » Print System (for additional information, see the QMS ImageServer documentation) and the QMS 2060 WX Print System (for complete information, see the QMS 2060 WX Print System documentation).

  • Page 12: Printer Configurations

    QMS 2060 Print System Options 2060 (Adobe Acrobat Documentation PDF format) CD-ROM QMS 2060 Print System Reference 2060 (Adobe Acrobat Documentation PDF format) CD-ROM QMS Crown Remote Console User’s Guide Software (Adobe Acrobat Utilities PDF format) CD-ROM QMS Crown Network Notes...
  • Page 13 This manual lists and explains all of the commands. The DOCs supported by your printer are listed in appendix D, “Document Option Commands,” of the Reference manual. In most cases only advanced users or system administrators need this information.
  • Page 14 Manuals Other Reference Sources The manuals included on the QMS 2060 Print System Documentation and QMS Software Utilities CD-ROMs are in Adobe Acrobat PDF for- mat. We’ve also provided the Acrobat Reader and QuickTime pro- grams on both CD-ROMs. The CD-ROM insert provides instructions on installing them.
  • Page 15 Your PDF-formatted manuals will empower you to take full advantage of all the capabilities of your printer. When you use Acrobat to view your manuals, keep the following tips in mind for using some of the navigation features built into Acrobat and your manuals.
  • Page 16 QMS at 1 (800) 523-2696 for purchase information. Elsewhere, refer to appendix A, “QMS Customer Support.” In addition, many applications, utilities, and printer drivers on the QMS Software Utilities CD-ROM are available on alternate media. Contact your QMS vendor for media availability and purchase infor- mation.

  • Page 17: Introduction

    This manual contains detailed, illustrated instructions to guide you as you unpack and set up your printer and connect it to a host (such as an IBM or compatible PC or an Ethernet network). In addition, it intro- duces you to the printer’s control panel. This manual is divided as fol-...

  • Page 18: Typographic Conventions

    Text you type, and messages and information displayed on the screen Variable text you type; replace the italicized word(s) with information specific to your printer or computer Information displayed in the printer message window PostScript operators and DOS commands...
  • Page 19 Chapter 2, “Setting Up Your Printer,” explains how to find a good loca- tion for the printer, unpack the printer, install a toner cartridge, and load and install the standard paper cassette.

  • Page 21: Finding A Good Location

    “Finding a Good Location” on page 2-2 “Unpacking the Printer” on page 2-6 “Installing a Toner Cartridge” on page 2-7 “Loading the Media Cassette” on page 2-10 “Loading the 500-sheet Cassette” on page 2-11 “Load the 250-sheet Cassette” on page 2-14...
  • Page 22 This chapter explains how to set up your QMS 2060 Print System for the first time. It includes information on finding a good location for the printer, unpacking and checking the shipment contents, installing a toner car- tridge, loading the cassettes, turning the printer on, and printing a start-up page.
  • Page 23 With enough space as shown in the following diagrams to allow adequate ventilation and easy servicing of the printer.
  • Page 24 Your printer requires a properly grounded AC outlet with a power range of ±10% of the rated line voltage (100/120 V or 230 V). Make sure that the capacity of the electrical outlet is at least 1.2 times that used by the printer. Noise-generating equipment should not be con- nected to the same electrical outlet as the printer.
  • Page 25 Make sure that all items are included in your shipment before setting up your printer. If any items are missing or damaged, contact your shipping company or your QMS vendor. See appendix A, “QMS Cus- tomer Support,” for product sales and support information.
  • Page 26 The packing materials that protect your printer during shipment—card- board, polystyrene, tape, and shipping spacers—must be removed before you can use the printer. Use the following procedure to unpack the printer. To ensure that your printer was not damaged during ship- ment, follow the entire procedure, including printing the start-up page.
  • Page 27 Carrying grips are located on the bottom of the left and right sides of the printer. WARNING! The printer weighs about 53 lbs (24 kg). Don’t lift it by yourself. ACHTUNG! Der Drucker wiegt ca 24 kg; bitte versuchen Sie niemals, das Gerät alleine anzuheben oder zu tragen.
  • Page 28 Distribute the toner in the cartridge. Hold the cartridge with both hands, and gently rock it from side- to-side five or six times to distribute the toner. Remove the tape seal. Holding the cartridge in place with your left hand, use your right hand to grasp the tab on the right side of the toner cartridge.
  • Page 29 Place the cartridge on the rails inside the upper unit of the printer, and gently slide it straight down until it’s firmly seated.
  • Page 30 The QMS 2060 Print System comes standard with either a 500-sheet cassette or a 250-sheet universal cassette, depending on the model ordered. These trays are interchangeable and therefore can be either in the upper or optional lower position. Basically, loading media in...
  • Page 31 Load media in the 500-sheet cassette as follows. For 250-sheet cas- sette instructions, see “Load the 250-sheet Cassette” on page 2-14. » Note: Reload media cassettes only when the printer is not actively printing. Pull out and remove the cassette.
  • Page 32 Position the cassette. The cassette has a spring in the bottom that provides some resis- tance when print media is placed on it. Lay the cassette flat on a hard surface and, using your left hand, push down on the plate in the cassette until it locks.
  • Page 33 Up to the top limit mark. Note: See appendix B, “Technical Specifications,” the “Print » Media” section, for media size feed edge information. Ensure that the media stack lies flat under the retaining clip and does not exceed the top limit mark. Slide the cassette back into the upper cassette feeder until it’s firmly seated.
  • Page 34 Load media in the 250-sheet universal cassette as follows. For 500- sheet cassette instructions, see “Loading the 500-sheet Cassette” on page 2-11. » Note: Reload media cassettes only when the printer is not actively printing. 2-14 QMS 2060 Print System Getting Started...
  • Page 35 Pull out and remove the cassette. Open the paper cover.
  • Page 36 Position the cassette. The cassette has a spring in the bottom that provides some resis- tance when print media is placed on it. Lay the cassette flat on a hard surface and, using your left hand, push down on the plate in the cassette until it locks.
  • Page 37 Media” section, for media size feed edge information. Ensure that the media stack lies flat, does not exceed the top limit mark, and is positioned under the retaining clips. Slide the cassette back into the printer until it’s firmly seated.
  • Page 38 Caution : Make sure that the printer power switch is turned off (the O is pressed down). Plug the power cord into the connector on the rear of the printer. Plug the opposite end of the power cord in a grounded AC...
  • Page 39 When you turn on the printer, a start-up page prints. This page gives you an overview of your QMS 2060 Print System. The following infor- mation prints on the start-up page: Printer product name, firmware level number, software version, revision, and release numbers.
  • Page 40 Note: Remember to turn off the printer before you install an option. » Now that you’ve set up your printer, go to chapter 3, “Connecting to a PC,” chapter 4, “Connecting to an Ethernet Network,” or chapter 5, “Connecting to a Macintosh.”...

  • Page 41: Pc Printing Software

    “Making a Parallel Connection” on page 3-3 “PC Printing Software” on page 3-5 “Printing from the PC” on page 3-15...
  • Page 42 If you’re connecting to a PC through an Ethernet network, refer to chapter 4, “Connecting to an Ethernet Network,” of this manual. Note: If the printer is more than 6.5 feet (2 meters) from the PC, » we recommend using a serial connection for better communication.
  • Page 43 QMS vendor or a local com- puter store. To connect your printer to a single PC, you need a parallel cable with a 36-pin male and a 25-pin male connector. Your printer supports both Centronics parallel, and IEEE 1284 bidirec- tional parallel communication.
  • Page 44 (it’s labeled “PARALLEL”). d Close the clips. Turn on both the printer and the PC. A start-up page should print. If it doesn’t, see the “Printer Problem Checklist” in chapter 6, “Troubleshooting,” of the Operation guide.

  • Page 45: Making A Serial Connection

    However, if you want to be able to use all your printer's special fea- tures (like collation, 600x600 dpi and 1200x1200 dpi printing), or if you've never printed to a PostScript printer before, we recommend...
  • Page 46 If you're using Windows, we recommend that you install one of the QMS-developed Level 2 Windows drivers on the QMS Software Utili- ties CD-ROM we shipped with your printer. Drivers are available for Windows 3.1 Windows for Workgroups 3.11 Windows 95 Windows NT 3.51...
  • Page 47 Note: If a printer using a Microsoft PostScript printer driver (instead of a QMS Level 2 printer driver) is already installed, the installation program will not overwrite the printer entry if it has the same printer name. Either remove or rename the existing printer entry before installing a new printer entry.
  • Page 48 To disable this feature, select the Output tab, choose Options, and click Compress Output. For more notes, see the readme file that comes with the printer driver.
  • Page 49 QMS Software Utilities CD-ROM for details on installing and setting up this utility. In addition, if a WIndows NT 4.0 or a QMS Level 2 Windows NT 4.0 printer driver has been previously installed, you must use the reinstallation procedure on page 3-12.
  • Page 50 OEMSETUP .INF displays in the File Name list. 11 Choose OK. A list if QMS printers displays. 12 Select QMS 2060, and choose Next. 13 When prompted, choose Replace Existing Driver, and then choose Next. 14 When prompted for a printer name, either accept the dis- played name or type a new one, and then choose Next.
  • Page 51 Applications may require special files, drivers, and/or configurations to produce correct output on your QMS 2060 Print System. Check your application’s documentation to determine if you need to use one or more of these files.
  • Page 52 The Printers dialog box displays the list of installed printers. If no printer is installed, the install button and the list of available Win- dows 95 printers displays. If no printer is installed, skip to step 4; otherwise continue at step 3.
  • Page 53 Select the QMS 2060 printer, then choose OK. If Windows does not ask for an updated driver, the QMS 2060 printer appears in the list of installed printers. If Windows asks for an updated driver, place PageMaker disk #6 in the disk drive, then type the letter of that drive.
  • Page 54 QuarkXPress application on your PC. Copy the QuarkXPress PDF or PPD from its installation directory to the QuarkXPress directory on your PC. Restart QuarkXPress. Check the Page Setup menu to verify that your printer is in the list of available printers.

  • Page 55: If You Have Trouble

    “Output Problems” section of chapter 6 of the Operation guide for troubleshooting tips. Now that you’ve connected your printer to a PC, continue with chapter 6, “Control Panel,” to learn about the printer’s control panel keys, indi-...

  • Page 57: What's Next

    “Introduction” on page 4-2 “Connect to the Network” on page 4-3 “Install the CrownNet Software” on page 4-3 “Configure the Interface” on page 4-4 “Configure the Network” on page 4-11 “Install the QMS CrownNet Print Utility or the QMS Network Print Monitor”...

  • Page 58: Install The Crownnet Software

    The QMS CrownNet Ethernet interface is a combination of hardware and host software that allows your printer to be connected to an Ethernet network that supports the following: Operating System AppleTalk LAN Manager/LAN Server NetWare UNIX Windows 3.1/Windows 95/Windows NT TCP/IP/NetBIOS/NetBEUI The instructions given in this chapter are the minimum steps needed to get your printer up and printing.
  • Page 59 The printer provides a twisted-pair (10BaseT) Ethernet interface. Twisted-pair Ethernet connections use RJ45 connectors. Turn off the printer, and unplug the power cord. Connect one end of the twisted-pair Ethernet cable to the printer’s Ethernet port. Connect the other end of the cable to the 10BaseT concentrator.
  • Page 60 This section briefly describes the configuration procedure for the CrownNet Ethernet printer interface. For a complete discussion of all of the configuration options available through the Administration/Com- munications/Network2/CrownNet menu, see chapter 2, “Interface Configuration,” of the QMS CrownNet System Administrator’s Guide .
  • Page 61 Note: In CrownAdmin, the printer shows up as QMS_xxxx_Print_ System_hardwareaddress, where xxxx is the printer model number and hardwareaddress is the printer’s hardware address as found on the printer start-up page. This address will be blank until the interface has been reset following installation.
  • Page 62 However, underscore characters ( _ ) are allowed to simulate multiword names (for example, PUBS_SERVER). At the printer control panel only, a space must be used following the last character of the file server name to end the name. For...
  • Page 63 However, underscore characters ( _ ) are allowed to simulate multiword names (for example, PUBS_PSERVER). At the printer control panel only, a space must be used following the last character of the print server name to end the name. For...
  • Page 64 Unless you want to use the default settings, use the following proce- dure to name the file and print servers. These names must be unique. » Note: In CrownAdmin, the printer shows up as QMS-xxxx-Print- System-hardwareaddress, where xxxx is the printer model number and hardwareaddress is the printer’s hardware address as...
  • Page 65 In the Administration/Communications/Network2/CrownNet/ NetWare/Config PServer/PServer Context[1], PServer Con- text[2], and PServer Context[3] menus, enter the name of the configuration file server and print server context. Note: The three PServer Context[x] menus allow you to identify » the name of the NDS configuration file server and the print server context.
  • Page 66 If you set a default router address in the previous step, in the Administration/Communications/Network2/CrownNet/TCPIP/ Subnet Mask menu enter the printer’s subnet mask. The default subnet mask is 000.000.000.000. This setting provides automatic sensing of gateways. If you identify a subnet mask, automatic sensing is disabled.
  • Page 67 (in the form ## . ## . ## . ## as found on the printer start-up page). » Note: You can also send the hardware address of a UNIX...
  • Page 68 It is not necessary to install these right now. You can do this after the printer is up and printing. For complete instructions, refer to the QMS CrownNet Setup Guide, QMS Network Print Monitor for Windows NT Administrator’s Guide, or QMS Network Print Monitor for Windows 95 Administrator’s Guide .
  • Page 69 “CrownNet Problems” section of chapter 6, “Trouble- shooting Printer Problems,” of the Operation manual. Now that you’ve connected your printer to an Ethernet network, continue with chapter 6, ”Control Panel,” in this manual to learn about...

  • Page 71: Macintosh Printing Software

    “Connecting to a Macintosh” on page 5-1 “Macintosh Printing Software” on page 5-2...
  • Page 72 However, if you want to be able to use all your printer's special fea- tures (like collation, 600x600 dpi and 1200x1200 dpi printing, if the Multi-Res daughterboard is installed), or if you have never printed to a...
  • Page 73 QMS Macintosh Utilities are utilities for controlling the printer from the Macintosh. It is included on the QMS Software Utilities CD-ROM shipped with your printer. With the Macintosh on, insert the QMS Software Utilities CD- ROM in your Macintosh’s CD-ROM drive.

  • Page 74: Installing Macintosh Utilities

    Utilities CD-ROM we shipped with your printer: If QuickDraw GX is installed on your Macintosh, load the GX driver for the QMS 2060 Print System. Go to “Installing the QMS GX Driver” on page 5-4. If QuickDraw GX is not installed on your Macintosh, install the follow-...
  • Page 75 QMS printer to take full advantage of all of these features. » Note: You cannot use the GX driver and the LaserWriter driver at the same time. To be able to use the GX drivers, you must have QuickDraw GX and at least System 7.1 (preferably 7.5) installed on your Macintosh.
  • Page 76 Custom Install allows you to select the GX driver(s) for the specific QMS printer(s) you want to install. For example, if you wanted to install the GX drivers for the QMS 2060, but not for the other listed QMS printers, you would click the check box next to this driver only.
  • Page 77 Custom Install allows you to select the GX driver(s) for the specific QMS printer(s) you want to install. For example, if you wanted to install the GX drivers for the QMS 2060, but not for the other listed QMS printers, you would click the check box next to this driver only.
  • Page 78 QMS printing options within the application (choose Options in the application’s Print dialog box). You can also print by dragging a document to the printer icon. Although the QMS 2060 supports LaserWriter 6, 7, and 8, we recom- mend using LaserWriter 8. »...
  • Page 79 Open the PSExec tosh Utilities” on page 5-3. Open the 4.x PPDs folder. Select the QMS 2060 printer description file and drag it to the Printer Descriptions folder on your Macintosh hard disk. From the Apple menu, choose Chooser. In the Chooser window, select the LaserWriter 8. x icon, and then select the QMS 2060.
  • Page 80 If you use QuarkXPress 3.3 or later, you can use the QMS 2060 PPD. However, if you use an earlier version, install the QMS 2060 PDF in the QuarkXPress folder in the PDF folder. To select the PDF, go to Quark's Page Setup dialog box.

  • Page 81: If You Have Trouble

    “Output Problems” section of chapter 6, “Trouble- shooting Printer Problems,” in the Operation guide for troubleshooting tips. Now that you’ve connected your printer to a Macintosh interface, go to chapter 6, “Control Panel,” to learn about the printer’s control panel keys, indicators, and message window.

  • Page 83: Control Panel Indicators

    “Control Panel Indicators” on page 6-3 “Message Window” on page 6-3 “Control Panel Keys” on page 6-6...
  • Page 84 The control panel, located on the front of the printer, allows you to direct the printer’s operation. In addition, it displays the current status of the printer, including any condition that needs your attention. The control panel consists of the following parts: Four indicators to provide printer status information.
  • Page 85 Four indicators on the control panel display printer status information. Indicator The control panel message window provides status and configuration The system is on line and system is ready. off line or not ready or both. The printer requires operator intervention.
  • Page 86 Status messages are listed in chapter 6, “Troubleshoot- ing Printer Problems,” of the Operation guide . Printer configuration is explained in chapter 4, “Printer Configuration,” of the Reference guide . Messages are displayed in three ways in the message window: Continuous display —...
  • Page 87 If you’re not familiar with using the configuration menu, refer to chap- ter 4, “Printer Configuration,” of the Reference guide for complete information. Administration/Miscellaneous/Keypad Language Menu English, French, German, Spanish Choices English Default Notes The printer must be restarted for changes to this menu to take effect.
  • Page 88 The Online/Offline, Tray Select, Status Page, and Cancel keys access frequently used printer options. The Copy key is available when the CrownCopy option is installed. Function Use the Online/Offline key to switch the printer from on line to off line status. Press...
  • Page 89 (multipurpose tray) upper (upper cassette) optional (optional cassette, if installed) The printer must be off line for you to use the Tray Select key. Use the Copy key to print a copy via CrownCopy, if that option is installed.

  • Page 90: Menu, Select, Previous, And Next Keys

    The Menu, Select, Previous, and Next keys are used in printer config- uration (explained in detail in chapter 4, “Printer Configuration,” of the Reference guide). Before using any of these keys, press the Online/ Offline key to take the printer off line.
  • Page 91 Now you’re ready to print. For more information on the day-to-day operation of your printer, refer to the Operation guide. For more tech- nical information, refer to the Reference guide.

  • Page 93: Sources Of Support

    “Sources of Support” on page A-2 “QMS World-wide Offices” on page A-5...

  • Page 94: Q-Fax

    Several sources of help and information are available, depending on the type of help you need: Your local vendor (the one from whom you bought the printer) may be best equipped to help you. Your vendor has specially trained service technicians available to answer questions, and the equipment to ana- lyze your printer problems.

  • Page 95: The Qms Corporate Bulletin Board System

    When you use CompuServe, type go qmsprint to go directly to the forum where QMS is located. The QMS library sec- tion contains application notes, printer drivers, utilities, technical infor- mation, and announcement files. The QMS server provides access to technical reports, new product announcements, a trade show schedule, and other general informa- tion about QMS.

  • Page 96: Internet

    XON/XOFF) The application and version you’re using The emulation you’re using Your printer firmware version (listed on the status/start-up pages) Fax—You can fax questions to the CRC at (334) 633-3716 (US). Provide the same information as listed above, and indicate whether you would like a faxed or a phoned reply.
  • Page 97 General Contact 1 (334) 633-4300 Fax 1 (334) 633-4866 Email info@qms.com Internet http://www.qms.com Information on QMS products, supplies, and accessories, and on the authorized QMS remarketer or service provider nearest you 1 (800) 523-2696 Customer Response Center (CRC) Technical Assistance 1 (334) 633-4500 Fax 1 (334) 633-3716 Internet http://www.qms.com...
  • Page 98 General Contact (+81)-3 3779-9600 Fax (+81)-3 3779-9650 Internet http://www.qmsj.co.jp General Contact Cra 43 DD#8-42 Officina 201 Medellin, Colombia (+57) (4) 312 13 70 Fax (+57) (4) 268 92 97 Anitech Sydney Business & Tech. Centre 52/2 Railway Parade 2141 Lidcombe NSW Australia (+61) 2–9901 3235 Fax (+61) 2–9901 3273...
  • Page 99 Via della Repubblica 56 43100 Parma Italy (+39) 52–1231 998 Fax (+39) 52–1232 902 Arenavägen 41, 6th floor 121 77 Johanneshov Sweden, Finland, Sweden Norway, and (+46) 8–600 01 30 Denmark Fax (+46) 8–600 01 33 Saskay House Unit 24 Sunninghill Business Park Peltier Road, Sunninghill, Johannesburg Republic of South Africa (+27) 11–807 6957...

  • Page 101: Menu Chart Conventions

    “Menu Chart Conventions” on page 2 “Installation Menu” on page 3 “Operator Control Menu” on page 4 “Administration Menu” on page 5...
  • Page 102 You may use this section as a quick reference for understanding and navigating the menu structure of the QMS 2060 Print System.The fol- lowing menu charts are provided in this section: Installation menu Shows the configurations available when the security key is used to access the Installation menu.
  • Page 103 Installation* ( Enter Operator Passwrd password) Off or On Use Operator Pwd ( Enter Admin Password password) Off or On Use Admin Pwd Optional Idle Operator Control Administration...
  • Page 104 Operator Control Copies Duplex* Collation Orientation Inputbin Chain Inputbins Multipurpose Size Chain Option Accounting* Optional Idle Administration 001-999 Off, On, or Tumble Off or On Portrait or Landscape Multipurpose Upper Optional * On, Off, or On Any Letter Statement Legal Universal Executive COM10...
  • Page 105 Format Disk Disk Operations* Format Disk Backup Hard Disk Idle Installation* TIFF (w/ImageServer)* CALS (w/ImageServer)* LN03+* QUIC* CCITT(w/ImageServer)* Toner Out Act. Energy Saver Man Feed Timeout Letterhead Def Resolution Printer Quality Toner Density Media Save Defaults Keypad Language Restore Disk Optional...
  • Page 107 Adobe Acrobat Reader 1-7 Illustrator 5-9 PhotoShop 5-11 Aldus 5-10 PageMaker 5-9 Application Notes, QMS 3-6 PC 3-6 Bulletin board, QMS 3-6, A-3 Cabling Ethernet 4-3 PC interface 3-3 Cancel key 6-6 Cassette Loading 2-10 Config PServer 4-6 Configuration Remote Console 4-4 Configuration menu Menu chart B-2 Control panel 6-6...
  • Page 108 File Srv Name 4-6 Installation Cassette 2-10 CrownNet software 4-3 GX drivers, Macintosh 5-4 Laser Prep, Macintosh 5-8 LaserWriter printer driver, Macintosh Printer description files, Macintosh 5-9 Printer options 2-20 Windows driver 3-6 Interface CrownNet Ethernet printer 4-4 Interface configuration Control panel 4-4 EtherTalk 4-4 NetWare 3.xx 4-5...

  • Page 109: Power Requirements

    NetWare 4.x Interface configuration 4-8 Network connection 4-3 Network interface TCP/IP, configuration 4-11 Next key 6-8 Online 6-6 Options See printer options OS/2 LAN Manager/LAN Server Configuration 4-5 Application 3-6 Driver 3-5, 5-2 Software 3-6 Software, printing 3-5 PDF file...
  • Page 110 Internet A-3 Technical A-4 World-wide A-5 TCP/IP Configuration 4-10 Network configuration 4-11 Technical support, QMS A-4 Tray Select key 6-6 Troubleshooting Ethernet port 5-11 Unpacking 2-6 Printer 2-6 Windows driver 3-6 Installation 3-6 WPD 3-12 —...

Table of Contents