QMS 2060 Getting Started page 47

Minimum System Requirements
An IBM or compatible computer with 386 or higher processor
A hard disk with at least 1 MB of free space
At least 8 MB of RAM
MS-DOS 5.0 or higher
Windows 3.1, Windows for Workgroups 3.11, Windows 95, or
Windows NT 3.51
Installation
» Note: If a printer using a Microsoft PostScript printer driver (instead of
a QMS Level 2 printer driver) is already installed, the installation
program will not overwrite the printer entry if it has the same printer
name. Either remove or rename the existing printer entry before
installing a new printer entry.
1 With your computer on and Windows running, insert either
the QMS Software Utilities CD-ROM or a disk with the printer
driver on it in the appropriate drive on your computer.
2 Open Explorer (Windows 95) or File Manager.
» Note: Running the installation program outside of windows will
automatically start Windows and run the program.
3 Change to the appropriate directory, and then double-click
SETUP.EXE to open the installation program.
CD-ROM—Change to the PC\WINDOWS\DRIVERS\PSLVL2
directory.
3.5" Disk—Change to the 3.5" disk directory (usually drive A).