QMS 2060 Getting Started page 27

2 Lift the printer out of the shipping carton.
Carrying grips are located on the bottom of the left and right sides
of the printer.
WARNING! The printer weighs about 53 lbs (24 kg). Don't lift it by
yourself.
ACHTUNG! Der Drucker wiegt ca 24 kg; bitte versuchen Sie
niemals, das Gerät alleine anzuheben oder zu tragen.
3 Remove the protective plastic covering, foam, and tape from
the outside of the printer.
4 Remove the packing materials and tape from inside the
printer and media cassette.
5 Slide the cassette into the feeder, if necessary.
6 Place the printer in the location where it is to reside.
Note: The toner cartridge is sensitive to bright light. Do not remove
»
the cartridge from its protective bag until you're ready to install it.
Store the cartridge in an environment that is not subject to extreme
heat or humidity, salty air, or corrosive gases, such as aerosols. Keep
the toner cartridge away from your computer. The magnets in the
cartridge can damage data, particularly on your floppy disks.
1 Lift the toner cartridge out of its shipping carton, open the
protective bag, and remove the cartridge.
Note: After taking the toner cartridge from its protective bag, do
»
not open the cover or touch the OPC drum of the toner cartridge
because it may deteriorate the drum and reduce print quality.