QMS 2060 Getting Started page 78

3 In the Chooser window, select the QMS 2060 GX Driver icon.
Note: If your printer is connected to a network with multiple
»
zones, rather than connected directly to your Macintosh, in the
AppleTalk Zones box select the zone in which your printer is
located.
4 Click Create.
The printer icon for the selected printer is created and is placed
on the desktop.
5 Exit the Chooser.
6 Click the desktop printer icon you just created to select it.
A new Printing menu is added to the Finder at the top of the desk-
top. This menu appears every time you select the desktop printer
icon.
7 Use the commands in the Finder's Printing menu to set up
the printer defaults.
Now, when you open an application, you can print using these default
settings, or you can customize them for a particular print job by
accessing the QMS printing options within the application (choose
Options in the application's Print dialog box). You can also print by
dragging a document to the printer icon.
Although the QMS 2060 supports LaserWriter 6, 7, and 8, we recom-
mend using LaserWriter 8.
» Note: The QMS 2060 PPD (a printer description file) is provided with
your printer so you can take advantage of special features while using
the LaserWriter driver.
1 If you haven't already, install a LaserWriter driver.
Refer to your Macintosh documentation.
2 If you haven't already, follow the instructions given above in
"Installing Macintosh Utilities" on page 5-3.