The QMS CrownNet Ethernet interface is a combination of hardware
and host software that allows your printer to be connected to an
Ethernet network that supports the following:
Operating System
AppleTalk
LAN Manager/LAN Server
NetWare
UNIX
Windows 3.1/Windows 95/Windows NT TCP/IP/NetBIOS/NetBEUI
The instructions given in this chapter are the minimum steps needed
to get your printer up and printing. For complete installation informa-
tion refer to the QMS CrownNet Setup Guide . For information on con-
figuring the CrownNet interface and using the CrownNet software
(CrownAdmin, CrownAdmin 3, CrownNet Manager, the Print Monitor,
and Crown View), refer to the QMS CrownNet System Administrator's
Guide . These manuals are found on the Software Utilities CD-ROM.
1
Connect the printer to the network.
2
Install the CrownNet software.
3
Configure the CrownNet interface.
4
Configure the network.
5
Configure the user workstations.
Protocol
EtherTalk
NetBIOS/NetBEUI
IPX/SPX/TCP/IP
TCP/IP