QMS 2060 Getting Started page 63

Spaces and lowercase characters are not allowed in print server
names. However, underscore characters ( _ ) are allowed to
simulate multiword names (for example, PUBS_PSERVER). At
the printer control panel only, a space must be used following the
last character of the print server name to end the name. For
example, the print server name
FIRSTGROUP_GROUPS_BLUE_TEAM_TEAMS_CRC_QMS
is 42 characters long, and must be entered as follows:
PSERVER NAME[1]
FIRST_GROUP_GROU
PSERVER NAME[2]
PS_BLUE_TEAM_TEA
PSERVER NAME[3]
MS_CRC_QMS<space>
where <space> is the space character.
3 In the Administration/Communications/Network2/CrownNet/
NetWare/RN Printer#1/Printer Slot # menu, enter the printer
slot number.
Note: This number must match the slot number chosen in the
»
Printer Configuration submenu of the Print Server Configuration
menu in the NetWare PCONSOLE utility.
4 In the Administration/Communications/Network2/CrownNet/
NetWare/RN Printer#1/PServer Name[1], PServer Name[2],
and PServer Name[3] menus, enter the name of the print
server.
» Note: The three PServer Name[x] menus allow you to identify 1
print server with a name up to 47 characters long. (Up to 16
characters can be entered in each of the 3 menus). You cannot
use these 3 menus to identify 3 print servers.
Spaces and lowercase characters are not allowed. However,
underscore characters ( _ ) are allowed to simulate multiword
names (for example, PUBS_PSERVER). At the printer control
panel only, a space must be used following the last character of