QMS 2060 Getting Started page 77

3 In the QMS GX Drivers Installer dialog box, verify the Install
Location.
To change the Install Location you can either use the drop-down
list box to display and select the appropriate disk drive, or choose
the Switch Disk button to scroll through the available disk drives.
4 Choose Easy Install or Custom install.
Easy Install automatically installs all of the GX drivers avail-
able on the disk for QMS printers.
Custom Install allows you to select the GX driver(s) for the
specific QMS printer(s) you want to install. For example, if
you wanted to install the GX drivers for the QMS 2060, but
not for the other listed QMS printers, you would click the
check box next to this driver only.
The amount of available space on your Macintosh hard disk
and the amount of space necessary for all of the selected
drivers are indicated near the bottom of the window.
Note: If you're using Custom Install, you can click the small
»
icon to the right of each install option for more information
about that option.
5 Click Install to begin the installation.
The Installer places the GX drivers in the Extensions folder inside
the System folder. It also creates a QMS GX Drivers folder in the
hard disk window. Inside this folder is the Installer log file, which
you can view to verify the installation.
When the installation is finished, a dialog box prompts you to
choose Continue to install additional drivers from the Custom
install option or to choose Quit to exit the Installer program.
Before you can print, you must create a desktop printer icon.
1 Make sure the printer is on and on line.
2 From the Apple menu choose Chooser.