QMS 2060 Getting Started page 39

3 Turn on the printer (press down the | side of the
power switch).
After a brief warm-up (less than 2 minutes) the printer produces a
start-up page.
4 If the start-up page prints and the quality is good, go on to
the next section, "Installing Options." If the start-up page
doesn't print or the quality isn't good, refer to chapter 6,
"Troubleshooting," in the QMS 2060 Print System Operation
manual.
When you turn on the printer, a start-up page prints. This page gives
you an overview of your QMS 2060 Print System. The following infor-
mation prints on the start-up page:
Printer product name, firmware level number, software version,
revision, and release numbers.
Cumulative page count for all page sizes, separate 11 x 17"/A3
page count, amount of resident RAM (in megabytes), number of
PostScript typefaces in ROM, default resolutions, and disk online
notification (if one or more is installed).