QMS 2060 Getting Started page 66

1 If necessary, in the Administration/Communications/
Network2/CrownNet/TCPIP/Internet Address menu, enter the
printer's Internet address.
The factory default Internet address is 161.033.128.024.
» Note: Only the IP address needs to be entered. It is not
necessary to enter the subnet mask.
2 If necessary, in the Administration/Communications/
Network2/CrownNet/TCPIP/Default Router menu enter the
Internet address of the default router.
The factory default router address is 000.000.000.000.
3 If you set a default router address in the previous step, in the
Administration/Communications/Network2/CrownNet/TCPIP/
Subnet Mask menu enter the printer's subnet mask.
The default subnet mask is 000.000.000.000. This setting
provides automatic sensing of gateways. If you identify a subnet
mask, automatic sensing is disabled.
4 You're now ready to print.
From this point, you'll probably perform most printing tasks from
your application. For specific information, check the printing sec-
tion in your application documentation.
For information on print media types and sizes, see chapter 2,
"Print Media," in the Reference manual .