IBM Flex System p270 Compute Node Installation And Service Manual page 262

C2008040 • C2008100
C2008040
Explanation: Begin transfer slot locks to partition
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2008060
Explanation: End transfer slot locks to partition
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2008080
Explanation: Begin transfer VIO slot locks to partition
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C20080A0
Explanation: End transfer VIO slot locks to partition
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C20080FF
Explanation: Hypervisor low-level session manager object is ready
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2008100
Explanation: Initializing service processor communication area #2
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
250
Power Systems: IBM Flex System p270 Compute Node Installation and Service Guide