IBM Flex System p270 Compute Node Installation And Service Manual page 142

A7004730 • A7013003
A7004730
Explanation: Informational system log entry only.
Response: No corrective action is required.
A7004740
Explanation: Informational system log entry only.
Response: No corrective action is required.
A7004741
Explanation: Informational system log entry only.
Response: No corrective action is required.
A700474A
Explanation: System has Active Memory Mirroring (AMM) ON, but is not licensed for AMM use
Response: The management interfaces have been used to set AMM to "ON" for the system. However, at IPL time,
the system does not have a valid license for AMM. The customer needs to contact IBM or a Partner Sales
representative to purchase and enter an Activation Code for this feature. If this is not possible, then turn off the
system; use the management interfaces to turn AMM "OFF"; and re-IPL.
A7004788
Explanation: Informational system log entry only.
Response: No corrective action is required.
A70047FF
Explanation: Informational system log entry only.
Response: No corrective action is required.
A700YYYY
Explanation: For any other A7xxyyyy SRC not listed here, see the description for the B7xxyyyy error code with the
same xxyyyy value.
Response: Perform the action in the B7xxyyyy error code with the same xxyyyy value.
A7013003
Explanation: Partition-initiated PHYP-content RSCDUMP.
Response: No corrective action is required.
130
Power Systems: IBM Flex System p270 Compute Node Installation and Service Guide