Introduction; Receiving, Inspecting And Unpacking The Wine Guardian System - Wine Guardian WG15 Installation, Operation And Maintenance Manual

Introduction

Dear Customer,
Congratulations and thank you for purchasing a Wine Guardian cooling system. We believe
it to be the best wine cellar cooling system on the market and hope that you will agree.
This guide is intended to help the installer and owner of the Wine Guardian cooling system
to properly install and maintain the equipment. In order to ensure a long and trouble-free
operation, please read this manual carefully, especially the safety instructions, and keep it
for future reference.
Receiving, Inspecting and Unpacking the Wine
Guardian System
NOTE: Wine Guardian systems are factory assembled and tested prior to
shipment.
Wine Guardian systems are shipped individually in corrugated boxes specially designed to
protect the equipment during shipment.
 Before opening the container, inspect the packing crates or boxes for obvious signs
of damage or mishandling.
 Write any discrepancy or visual damage on the bill of lading before signing.
 Inspect all equipment for any sign of damage caused during transit.
 Report all visual or concealed damage to the carrier and file a claim immediately.
If this procedure is not followed, the shipping company may reject the
claim and the consignee may suffer the loss. Do not return the shipment
* DO NOT LIFT THE UNIT UP FROM ITS PLASTIC FRONT PIECES
**THE UNIT SHOULD BE LIFTED FROM UNDERNEATH ITS BASE AT
IMPORTANT
to the factory.
WARNING
TO AVOID DAMAGING THEM
BOTH ENDS OF THE SYSTEM.
5