My Music Cuts Out Or My Headphones Won't Stay Connected; Restarting Your Watch; Resetting All Default Settings; Acquiring Satellite Signals - Garmin MARQ AVIATOR Owner's Manual

• Turn off Bluetooth technology on your phone.
Refer to the owner's manual for your phone for more
information.
• Stay 10 m (33 ft.) away from your phone while
connecting your headphones to your watch.
• Pair your headphones with your watch
Bluetooth Headphones,
My music cuts out or my headphones won't stay
connected
When using a MARQ watch connected to Bluetooth
headphones, the signal is strongest when there is a direct
line of sight between the watch and the antenna on the
headphones.
• If the signal passes through your body, you may
experience signal loss or your headphones may
become disconnected.
• If you wear your MARQ watch on your left wrist, you
should make sure the headphone's Bluetooth antenna
is on your left ear.
• Since headphones vary by model, you can try wearing
the watch on your other wrist.
• If you are using metal or leather watch bands, you
can switch to silicone watch bands to improve signal
strength.

Restarting Your Watch

1 Hold LIGHT until the watch turns off.
2 Hold LIGHT to turn on the watch.

Resetting All Default Settings

Before you reset all default settings, you should sync the
watch with the Garmin Connect app to upload your activity
data.
You can reset all of the watch settings to the factory
default values.
1 From the watch face, hold MENU.
2 Select System > Reset.
3 Select an option:
• To reset all of the watch settings to the factory
default values and save all user-entered information
and activity history, select Reset Default Settings.
• To delete all activities from the history, select Delete
All Activities.
• To reset all distance and time totals, select Reset
Totals.
• To reset all of the watch settings to the
factory default values and delete all user-entered
information and activity history, select Delete Data
and Reset Settings.
NOTE: If you have set up a Garmin Pay wallet, this
option deletes the wallet from your watch. If you
have music stored on your watch, this option deletes
your stored music.
64
(Connecting
page 22).

Acquiring Satellite Signals

The device may need a clear view of the sky to acquire
satellite signals. The time and date are set automatically
based on the GPS position.
TIP: For more information about GPS, go to
/aboutGPS.
1 Go outdoors to an open area.
The watch should be oriented with 6 o'clock pointing
toward the sky.
2 Wait while the device locates satellites.
It may take 30 to 60 seconds to locate satellite signals.

Improving GPS Satellite Reception

• Frequently sync the watch to your Garmin account:
◦ Connect your watch to a computer using the USB
cable and the Garmin Express application.
◦ Sync your watch to the Garmin Golf app using your
Bluetooth enabled phone.
◦ Connect your watch to your Garmin account using a
Wi‑Fi wireless network.
While connected to your Garmin account, the watch
downloads several days of satellite data, allowing it to
quickly locate satellite signals.
• Take your watch outside to an open area away from tall
buildings and trees.
• Remain stationary for a few minutes.

The temperature reading is not accurate

Your body temperature affects the temperature reading
for the internal temperature sensor. To get the most
accurate temperature reading, you should remove the
watch from your wrist and wait 20 to 30 minutes.
You can also use an optional tempe external temperature
sensor to view accurate ambient temperature readings
while wearing the watch.

Maximizing the Battery Life

You can do several things to extend the life of the battery.
• Change the power mode during an activity
the Power Mode, page 6).
• Turn on the battery saver feature from the controls
menu (Viewing the Controls Menu,
• Reduce the backlight timeout
Settings, page 56).
• Reduce the backlight brightness.
• Use UltraTrac GPS mode for your activity
GPS Setting, page 49).
• Turn off Bluetooth technology when you are not using
connected features (Connected Features,
• When pausing your activity for a longer period of
time, use the resume later option
page 6).
• Turn off activity tracking
page 34).
garmin.com
(Changing
page 1).
(Changing the Backlight
(Changing the
page 15).
(Stopping an Activity,
(Turning Off Activity Tracking,
Troubleshooting