Table of Contents
Advertisement
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole
information screen.
Hold MENU, select the activity settings, and select Big
Numbers.
The distance to the back of the green
The distance to the middle of the green or selected
pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the
map.
1 Press UP or DOWN to measure the distance to the
target.
2 If necessary, select
Changing Holes
You can change holes manually from the hole view
screen.
1 While playing golf, press START.
2 Select Change Hole.
3 Select a hole.
12
or
to zoom in or out.
Changing the Green
If you are playing a hole with more than one green, you
can change the green.
1 While playing golf, press START.
2 Select Change Green.
3 Select a green.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1 From the hole information screen, press START.
2 Select Move Flag.
3 Press UP or DOWN to move the pin position.
4 Press START.
The distances on the hole information screen are
updated to show the new pin location. The pin location
is saved for only the current round.
Viewing Measured Shots
Before the device can automatically detect and measure
shots, you must enable scoring.
Your device features automatic shot detection and
recording. Each time you take a shot along the fairway,
the device records your shot distance so you can view it
later.
TIP: Automatic shot detection works best when you wear
the device on your leading wrist and make good contact
with the ball. Putts are not detected.
1 While playing golf, press START.
2 Select Measure Shot.
Your last shot distance appears.
NOTE: The distance automatically resets when you hit
the ball again, putt on the green, or move to the next
hole.
3 Press DOWN.
4 Select Previous Shots to view all recorded shot
distances.
Manually Measuring a Shot
1 Take a shot and watch where your ball lands.
2 From the hole information screen, press START.
3 Select Measure Shot.
4 Press DOWN.
5 Select Add Shot > Yes.
6 Walk or drive to your ball.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4
and 5 holes. Custom targets also appear in this list.
1 From the hole information screen, press START.
2 Select Layups.
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Activities and Apps
Advertisement
Table of Contents
