Table of Contents
Advertisement
Viewing Data Totals
You can view the accumulated distance and time data
saved to your watch.
1 From the watch face, hold MENU.
2 Select History > Totals.
3 Select an activity.
4 Select an option to view weekly or monthly totals.
Using the Odometer
The odometer automatically records the total distance
traveled, elevation gained, and time in activities.
1 From the watch face, hold MENU.
2 Select History > Totals > Odometer.
3 Press UP or DOWN to view odometer totals.
Deleting History
1 From the watch face, hold MENU.
2 Select History > Options.
3 Select an option:
• Select Delete All Activities to delete all activities
from the history.
• Select Reset Totals to reset all distance and time
totals.
NOTE: This does not delete any saved activities.
Customizing Your Device
Aviation Settings
Hold MENU, and select Aviation.
Aviation Units: Sets the units of measure used for aviation
data.
Airport Search: Sets the airport options that appear
when searching for airports. For example, you can
set the minimum runway length and surface material,
and indicate whether private airports and heliports are
displayed in search results.
Ownship: Sets the aircraft type to helicopter or plane.
Altimeter Settings & Alerts: Allows you to customize the
altimeter settings
(Altimeter Settings,
NEXRAD Tiles: Allows you to display a single patch
of NEXRAD data, or display additional NEXRAD data
patches based on a direction from your current
location.
NEXRAD Vibe: Sets the device to vibrate when a NEXRAD
patch download completes.
Connext: Allows you to pair a Connext device to display
aircraft information
(Pairing a Connext Device,
You can also receive and transmit your GPS position
from a paired device.
Cross Track Alert: Sets the device to vibrate when you
deviate from your course by a specific distance. You
can use the Vibe Pattern option to preview the vibration
patterns before you fly.
Customizing Your Device
Fuel Tank Reminder: Sets an alarm to sound or vibrate
after a specific number of minutes and displays a
message to check the fuel tank gauges. You can
use the Vibe Pattern option to preview the vibration
patterns before you fly.
Activities and App Settings
These settings allow you to customize each preloaded
activity app based on your needs. For example, you can
customize data pages and enable alerts and training
features. Not all settings are available for all activity types.
Hold MENU, select Activities & Apps, select an activity,
and select the activity settings.
3D Distance: Calculates your distance traveled using your
elevation change and your horizontal movement over
ground.
3D Speed: Calculates your speed using your elevation
change and your horizontal movement over ground
Speed and Distance,
Accent Color: Sets the accent color of each activity to
help identify which activity is active.
Add Activity: Allows you to customize a multisport
activity.
Alerts: Sets the training or navigation alerts for the
activity.
Altimeter: Displays the pressure altitude, or GPS altitude,
when the watch has a GPS fix.
Auto Climb: Enables the watch to detect elevation
changes automatically using the built-in altimeter.
Auto Fly: In watch mode, allows a flight activity to begin
automatically when the detected climb rate exceeds a
specified speed. The activity stops when the ground
speed drops below 30 kn for a specified time.
Auto Lap: Sets the options for the Auto Lap feature
Lap,
Auto Pause: Sets the watch to stop recording data when
you stop moving or when you drop below a specified
speed
Auto Rest: Enables the watch to automatically detect
when you are resting during a pool swim and create
page 53).
a rest interval
Auto Run: Enables the watch to detect ski runs
automatically using the built-in accelerometer.
Auto Scroll: Enables you to move through all of the activity
data screens automatically while the timer is running
(Using Auto Scroll,
Auto Set: Enables the watch to start and stop exercise
sets automatically during a strength training activity.
page 18).
Background Color: Sets the background color of each
activity to black or white.
Big Numbers: Changes the size of the numbers on the golf
hole information screen.
ClimbPro: Displays ascent planning and monitoring
screens while navigating.
page 49).
page 48).
(Enabling Auto Pause,
page 48).
(Auto Rest and Manual Rest,
page 49).
(3D
(Auto
page 11).
45
Advertisement
Table of Contents
