Table of Contents
Advertisement
Device Information
Specifications
Rechargeable, built-in lithium-ion
Battery type
battery
Up to 12 days (smartwatch mode
Battery life
with activity tracking and 24/7 wrist-
based heart rate monitoring)
Water rating
10 ATM
Operating and
From -20º to 45ºC (from -4º to
storage tempera
113ºF)
ture range
Charging tempera
From 0º to 45ºC (from 32º to
ture range
113ºF)
Wireless frequen
2.4 GHz @ 19 dBm maximum, 13.56
cies
MHz @ -36 dBm maximum
Battery Information
The actual battery life depends on the features enabled
on your device, such as activity tracking, wrist-based heart
rate, smartphone notifications, GPS, internal sensors, and
connected sensors.
Battery Life
Mode
Smartwatch mode with activity tracking
Up to 12 days
and 24/7 wrist-based heart rate moni
toring
Up to 28 hours GPS mode with wrist-based heart rate
GPS mode with wrist-based heart rate
Up to 9 hours
and streaming music
UltraTrac GPS mode with gyro-based
Up to 48 hours
dead reckoning (with wrist-based heart
rate monitoring turned off)
Device Maintenance
Device Care
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents
that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after
exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure to
these substances can damage the case.
Avoid pressing the buttons under water.
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
1
The device withstands pressure equivalent to a depth of 100 m. For more information, go to www.garmin.com/waterrating.
62
1
NOTICE
Do not store the device where prolonged exposure to
extreme temperatures can occur, because it can cause
permanent damage.
Cleaning the Watch
Some users may experience skin irritation after prolonged
use of the watch, especially if the user has sensitive skin
or allergies. If you notice any skin irritation, remove the
watch and give your skin time to heal. To help prevent skin
irritation, ensure the watch is clean and dry, and do not
overtighten the watch on your wrist.
Even small amounts of sweat or moisture can cause
corrosion of the electrical contacts when connected to
a charger. Corrosion can prevent charging and data
transfer.
1 Wipe the watch using a cloth dampened with a mild
detergent solution.
2 Wipe it dry.
After cleaning, allow the watch to dry completely.
TIP: For more information, go to garmin.com/fitandcare.
Changing Integrated QuickFit
1 Pull to open the latch, and remove the integrated
QuickFit strap or bracelet from the watch.
2 Pull to open the latch on the integrated strap or
bracelet, and align it with the watch.
3 Close the latch over the watch pin.
NOTE: Make sure the strap or bracelet is secure. There
should be a small gap
strap or bracelet.
CAUTION
NOTICE
Accessories
®
between the latch and the
Device Information
Advertisement
Table of Contents
