Adding A Map To An Activity; Activity Alerts; Setting An Alert - Garmin MARQ AVIATOR Owner's Manual

3 Select the activity to customize.
4 Select the activity settings.
5 Select Data Screens.
6 Select a data screen to customize.
7 Select an option:
• Select Layout to adjust the number of data fields on
the data screen.
• Select Data Fields, and select a field to change the
data that appears in the field.
TIP: For a list of all the available data fields, go
to Data Fields, page 65. Not all data fields are
available for all activity types.
• Select Reorder to change the location of the data
screen in the loop.
• Select Remove to remove the data screen from the
loop.
8 If necessary, select Add New to add a data screen to
the loop.
You can add a custom data screen, or select one of the
predefined data screens.

Adding a Map to an Activity

You can add the map to the data screens loop for an
activity.
1 Hold MENU.
2 Select Activities & Apps.
3 Select the activity to customize.
4 Select the activity settings.
5 Select Data Screens > Add New > Map.

Activity Alerts

You can set alerts for each activity, which can help you
to train toward specific goals, to increase your awareness
of your environment, and to navigate to your destination.
Some alerts are available only for specific activities. There
are three types of alerts: event alerts, range alerts, and
recurring alerts.
Event alert: An event alert notifies you once. The event is
a specific value. For example, you can set the watch to
alert you when you burn a specified number of calories.
Range alert: A range alert notifies you each time the
watch is above or below a specified range of values.
For example, you can set the watch to alert you when
your heart rate is below 60 beats per minute (bpm) and
over 210 bpm.
Recurring alert: A recurring alert notifies you each time
the watch records a specified value or interval. For
example, you can set the watch to alert you every
30 minutes.
Alert Name Alert Type
Cadence Range
Event,
Calories
recurring
Customizing Your Device
Description
You can set minimum and
maximum cadence values.
You can set the number of
calories.
Alert Name Alert Type
Event,
Custom
recurring
Distance Recurring
Elevation Range
Heart Rate Range
Pace Range
Pacing Recurring
Power Range
Proximity Event
Run/Walk Recurring
Speed Range
Stroke Rate Range
Event,
Time
recurring
Track Timer Recurring

Setting an Alert

1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Alerts.
6 Select an option:
• Select Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
7 If necessary, select the type of alert.
Description
You can select an existing
message or create a custom
message and select an alert
type.
You can set a distance
interval.
You can set minimum and
maximum elevation values.
You can set minimum and
maximum heart rate values
or select zone changes. See
About Heart Rate Zones,
page 31 and Heart Rate Zone
Calculations, page 32.
You can set minimum and
maximum pace values.
You can set a target swim
pace.
You can set the high or low
power level.
You can set a radius from a
saved location.
You can set timed walking
breaks at regular intervals.
You can set minimum and
maximum speed values.
You can set high or low
strokes per minute.
You can set a time interval.
You can set a track time
interval in seconds.
47