Table of Contents
Advertisement
Setting Navigation Alerts
You can set alerts to help you navigate to your
destination.
1 Hold MENU.
2 Select Navigation > Alerts.
3 Select an option:
• To set an alert for a specified distance from your
final destination, select Final Distance.
• To set an alert for the estimated time remaining until
you reach your final destination, select Final ETE.
• To set an alert when you stray from the course,
select Off Course.
• To enable turn-by-turn navigation prompts, select
Turn Prompts.
4 If necessary, select Status to turn on the alert.
5 If necessary, enter a distance or time value, and select
.
Power Manager Settings
Hold MENU, and select Power Manager.
Battery Saver: Allows you to customize system settings
to extend battery life in watch mode
Battery Saver Feature,
Power Modes: Allows you to customize system settings,
activity settings, and GPS settings to extend battery
life during an activity
(Customizing Power Modes,
page 55).
Battery Percentage: Displays remaining battery life as a
percentage.
Battery Estimates: Displays remaining battery life as an
estimated number of days or hours.
Customizing the Battery Saver Feature
The battery saver feature allows you to quickly adjust
system settings to extend battery life in watch mode.
You can turn on the battery saver feature from the
controls menu
(Viewing the Controls Menu,
1 Hold MENU.
2 Select Power Manager > Battery Saver.
3 Select Status to turn on the battery saver feature.
Customizing Your Device
(Customizing the
page 55).
page 1).
4 Select Edit, and select an option:
• Select Watch Face to enable a low-power watch
face that updates once per minute.
• Select Music to disable listening to music from your
watch.
• Select Phone to disconnect your paired phone.
• Select Wi-Fi to disconnect from a Wi‑Fi network.
• Select Activity Tracking to turn off all-day activity
tracking, including steps, floors climbed, intensity
minutes, sleep tracking, and Move IQ events.
• Select Wrist Heart Rate to turn off the wrist heart
rate monitor.
• Select Backlight to disable the automatic backlight.
The watch displays the hours of battery life gained with
each setting change.
5 Select During Sleep to enable the battery saver feature
during your normal sleep hours.
TIP: You can set your normal sleep hours in the user
settings on your Garmin Connect account.
6 Select Low Battery Alert to receive an alert when the
battery is low.
Customizing Power Modes
Your device comes preloaded with several power modes,
allowing you to quickly adjust system settings, activity
settings, and GPS settings to extend battery life during
an activity. You can customize existing power modes and
create new custom power modes.
1 Hold MENU.
2 Select Power Manager > Power Modes.
3 Select an option:
• Select a power mode to customize.
• Select Add New to create a custom power mode.
4 If necessary, enter a custom name.
5 Select an option to customize specific power mode
settings.
For example, you can change the GPS setting or
disconnect your paired phone.
The watch displays the hours of battery life gained with
each setting change.
6 If necessary, select Done to save and use the custom
power mode.
Restoring a Power Mode
You can reset a preloaded power mode to the factory
default settings.
1 Hold MENU.
2 Select Power Manager > Power Modes.
3 Select a preloaded power mode.
4 Select Restore > Yes.
System Settings
Hold MENU, and select System.
Language: Sets the language displayed on the device.
55
Advertisement
Table of Contents
