Table of Contents
Advertisement
Figure Legend
1
2
3
4
5
6
7
8
9
LED Indicators
There are four LED indicators on the control panel, labeled Ready (green),
Use Cleaner (yellow), Drive Fault (red), and Loader Fault (red).
The Ready LED (green) lights when the Library is ready to accept commands
from the host computer. The Ready LED goes out when you enter the Menu
mode, indicating that the Library is offline.
The Use Cleaner LED (yellow) indicates that one or more of the drives in the
Library needs cleaning. Perform a cleaning operation as described in Chapter
5, "Maintenance." When the Use Cleaner LED lights, you can find out which
drive needs cleaning by selecting Cleaning Needed on the Drive Status
submenu.
When either the Drive Fault or the Loader Fault LED (red) lights, a Fault
screen appears on the LCD display. The Fault screen is described later in this
chapter.
See Chapter 6, "Troubleshooting," for a list of Fault Symptom Codes (FSC)
and Error Recovery Procedures (ERP).
Table 4-2
Library Control Panel
Description
Ready LED
User cleaner LED
Drive fault LED
Loader fault LED
Display panel
Escape button
Enter button
Scroll up button
Scroll down button
Operation 4-5
Advertisement
Table of Contents
Troubleshooting
