1-2 Compaq StorageWorks SSL2000 Series Library Reference Guide
Library Models
Multi-Unit Library Systems
Libraries are currently available with:
I
A tabletop or rackmount version
I
One or two tape drives
I
An optional Pass-Through Mechanism (PTM) for connecting up to five
library units
I
AIT 2 technology
I
A Fast/Wide, Low Voltage Differential (LVD)/Single Ended (SE)
SCSI-2 interface
The drives used in the Library read from and write to 8 mm AIT 2 data tape
cartridges with a native capacity of 35 GB or 50 GB (see Table 1-1).
Model Number
175195-B21
175195-B22
175196-B21
175196-B22
The Library features SmartScale Storage™ – an architecture that lets you
combine multiple units into an integrated library system. This architecture
enables the robotics in each of the Library units to exchange cartridges by
means of a vertical PTM. Under the control of the unit you configure to be the
master unit, the PTM integrates the robotics in the individual slave units into a
single high-performance library robotics system. For more information, see
Chapter 3, "Installing and Removing the Pass-Through Mechanism."
Table 1-1
Library Models
Configuration
1 Drive, AIT 2 50 GB, tabletop, LVD/SE
2 Drive, AIT 2 50 GB, tabletop, LVD/SE
1 Drive, AIT 2 50 GB, rackmount, LVD/SE
2 Drive, AIT 2 50 GB, rackmount, LVD/SE