Installing The Panel Extensions; Figure 2-8. Installing The Panel Extension - Compaq StorageWorks SSL2000 Series Reference Manual

2-10 Compaq StorageWorks SSL2000 Series Library Reference Guide

Installing the Panel Extensions

NOTE: The left and right slides are the same so there is no risk of confusing the parts
upon reassembly.
1. Place a panel extension against one side of the Library so that the holes
in the panel extension are aligned with the two holes in the chassis (see
Figure 2-8).

Figure 2-8. Installing the panel extension

2. Install two screws through the holes in the panel extension into the
Library.
NOTE: The panel extension has two pairs of mounting holes. Use the forward pair for the
regular mounting position ( 1 Figure 2-8). Regular mounting leaves the curved front panel
surface extending outward from the front of the storage cabinet. The rear pair of holes
permit a flush mount position that leaves the front panel recessed into the storage cabinet
( 2 Figure 2-8). You might choose flush mounting if, for example, you have storage
cabinet doors that would be hindered by the protruding front panel.
3. Repeat steps 1 and 2 for the other side of the Library.
2
1
cc0027