Compaq StorageWorks SSL2000 Series Reference Manual page 103

4-20 Compaq StorageWorks SSL2000 Series Library Reference Guide
3. The * at the left of line 2 (the current selection) disappears, meaning you
have not selected an item from the list.
NOTE: The contents of the lists on line 2 and line 4 vary as follows.
Initial Screen – From Line
The list on line 2 (the From line) includes every drive and magazine slot
(including mail slots) with cartridges. (You cannot retrieve a cartridge from an
empty slot or drive.)
Initial Screen – To Line
The list on line 4 (the To line) includes all the valid destination choices, that is,
drives and slots that are empty. (You can't put a cartridge into a full slot or
drive.)
Scroll List – To Line
There is another limitation on the To list. If you select a drive on the From
screen, the To list can include only slots. If you select a slot on the From
screen, the To list can contain only drives.
For example, load the cartridge that is in Slot 11 into any available drive. Use
the θ button to scroll line two to Slot 11. The following screen appears:
From:
υ
Slot 11
To:
Drv 0
When you scroll to your desired source, press the Enter button to select it.
Two changes occur in the display as shown below:
1. The * reappears at the beginning of line 2, indicating that you have
made a selection.
2. The υ moves to line 4, indicating that you can select a destination.
From:
*Slot 11
To:
υ
*Drv 0
≤