Table of Contents
Advertisement
Initialization Screens
After the POST completes, the library robotics are initialized. A series of
screens similar to the one shown is displayed during this process.
Compaq SSL2020TL
Firmware Level 0X.XX
Initializing Loader
Default Screen
After the POST diagnostics have concluded successfully and initialization is
complete, the following Default screen appears. Note that the Default screen
consists of two pages.
Page 1 Default screen:
Loader Idle
Drv0: Ready or No Tape
Drv1: Idle
Page 2 Default screen:
Loader Idle
0
10
Page 1 displays the library and drive status. Page 2 displays the library status
(Line 1) and magazine slot status (Lines 3 and 4).
The library status lines show each slot as a rectangle. A solid block indicates
that a cartridge is present. A hollow block indicates that a slot is empty.
Line 4 also shows the status of the mail slot. A
cartridge is in the mail slot. A
The π π π π , and θ θ θ θ buttons control which Default page is displayed.
_ _ _ _ _ _ _
9
_ _ _ _ _ _ _
18
symbol indicates that the mail slot is empty.
Operation 4-9
symbol indicates that a
Advertisement
Table of Contents
Troubleshooting
