Compaq StorageWorks SSL2000 Series Reference Manual page 44

Library
Hide thumbs Also See for StorageWorks SSL2000 Series:
Table of Contents

Advertisement

4. To select a configuration option, press the π or θ button on the control
panel until the υ appears next to the option you want to change. The first
two choices on this menu, SCSI Options and Library Options, are
actually categories of options. In this case, choose SCSI Options. Press
the Enter button to display the options for that category. The following
submenu appears:
υ Library Parity:
*Enabled
Library Bus ID:
*0
NOTE: Look closely at the submenu listed above and note that the υ on the display is
next to line 1, and that line 2 is indented. This tells you that it is a two-tiered menu. The π
and θ buttons work on two levels in this kind of menu, which is typical of many submenus
of the Configure menu. The first level is as follows: If you press the θ button, the υ moves
to line 3. If you press the π button, the υ moves back to line 1.
If you press the Enter button while the υ is next to line 1 (or line 3), the π
and θ buttons operate on the second level. As a result, the υ moves next to
line 2 (or line 4), and a ⁄ appears at the end of line 4, indicating that there
is a list of settings that can be selected using the π and θ buttons.
The ⁄ at the end of line 4 means that there are other options that can be
displayed by scrolling, using the θ button repeatedly.
5. For example, set the Drive 0 bus ID to 3. With the υ next to line 1, press
the θ button until the display scrolls as shown:
υ Library Bus ID:
*0
Drive 0 Bus ID:
*4
6. With the υ next to line 3, press the Enter button. The υ moves to line 4,
the ⁄ remains at the end of line 4, and a ≤ displays at the end of
line 1.
7. Use the π and θ buttons to scroll line 4 to display the possible settings.
Scroll up so that a 3 appears and then press the Enter button to save the
new selection. An
current selection.
8. Press the Escape button repeatedly until the submenu reappears.
Repeat this procedure for each configuration option you want to change.
appears to the left of the 3 indicating it is the
Installation 2-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

175195-b21175195-b22175196-b21175196-b22

Table of Contents