Figure 2-2. Releasing The Lockdown Mechanism - Compaq StorageWorks SSL2000 Series Reference Manual

3. Turn the spring-loaded lockdown screw at the back of the unit
counter-clockwise. The screw pops out and the lockdown mechanism
releases from the shuttle ( 1 Figure 2-2).
4. Connect AC power and then turn the unit power on.
1
1

Figure 2-2. Releasing the lockdown mechanism

To lock the lockdown mechanism:
5. Park the shuttle assembly by selecting the Maintenance menu and then
Park from the Main menu.
NOTE: The shuttle assembly moves to its home position, bringing the threaded hole into
alignment with the lockdown screw.
6. Turn off the unit.
7. Disconnect the power cord from the AC power source.
8. If necessary, reposition the unit for easier access to the back panel.
Installation 2-3
cc0016