Cabling The Ptm And Multi-Unit Library System; Connecting To The Ptm Motor Housing Assembly - Compaq StorageWorks SSL2000 Series Reference Manual

3-8 Compaq StorageWorks SSL2000 Series Library Reference Guide
Cabling the PTM and Multi-Unit Library
System

Connecting to the PTM Motor Housing Assembly

Cabling the PTM and multi-unit Library system includes attaching cables to
the following interface connectors:
I
PTM motor housing assembly
I
Library unit
CAUTION: Make sure the power is off to the unit that you plug the motor
connector into.
1. Connect one end of the control cable to the connector in the PTM motor
housing assembly (see Figure 3-5).
2. Connect the other end of the control cable to the motor connector on the
master unit (see Figure 3-5).