Compaq StorageWorks SSL2000 Series Reference Manual page 101

4-18 Compaq StorageWorks SSL2000 Series Library Reference Guide
An underline cursor displays under the first digit. To set the first digit, press
the π button or the θ button until the number you want appears. To move the
cursor to the second digit, press the Enter button. Repeat the process for each
of the four digits. Be sure to remember the 4-digit number; you use it to enter
the Menu Mode. Use an unlock code of 0000 to disable control panel locking.
When you have finished entering four digits, press the Escape button. The
following screen appears. Your code appears instead of XXXX.
Unlock Code
*"XXXX"
ENTER to Accept
ESCAPE to Exit
Press the Enter button to accept the displayed unlock code or Escape to return
to the Main menu.
The next time you try to enter the Menu Mode, the following screen appears.
You can still display the Status menu without using the security code by
pressing the Escape button at the Default screen.
Front Panel Locked
ENTER to Unlock
ESCAPE to Exit
When you press the Enter button, the following screen appears:
Unlock Code
" "
Using the π and θ buttons, set the first digit of the unlock code. Press the
Enter button to move the cursor to the second digit and repeat the process.
When you have finished, press the Escape button. The following screen
appears:
Unlock Code
*"XXXX"
ENTER to Validate
ESCAPE to Exit
Press the Enter button to validate your choice. If the code is correct, the Main
menu appears. If the code is incorrect, an error screen appears. If you forgot
your unlock code, contact your Technical Support representative for
assistance.
≤
⁄
≤
⁄