Dependencies And Requirements; Storage Requirements; Ip Networking And Setup Requirements - HP StorageWorks NAS b2000 v2 Quick Start Manual

Hide thumbs Also See for StorageWorks NAS b2000 v2:

Table of Contents

Plankton_book.book Page 16 Monday, February 3, 2003 4:06 PM

Product Overview

Dependencies and Requirements

All manuals and user guides at all-guides.com

Specific conditions must be met in order for the NAS b2000 v2 to operate.

To protect against data loss from hard drive failure, arrays should be configured

with fault tolerance in mind. Several fault tolerance methods have been devised

and are described in the HP StorageWorks NAS b2000 v2 Administration Guide.

The following are IP networking and setup requirements needed for a

NAS b2000 v2 device:

Windows-based PC running Microsoft Internet Explorer 5.5 (or later) on the

■

same network segment as the NAS b2000 v2; this will be used to set up and

administer the NAS device.

■

A single Ethernet connection on a switch or hub for the embedded Integrated

Lights-Out (iLO).

■

Additional Ethernet connection ports to client subnets (depending on network

options ordered).

Note:

The RapidLaunch client and NAS b2000 v2 must be on the same network

segment as the management port or the RapidLaunch utility will not detect the

NAS b2000 v2.

NAS b2000 v2 Quick Start Guide

Table of Contents