Set The Cleaning Mode - HP StorageWorks 1/16 Tape SuperLoader Manual

SuperLoader Operation

Set the Cleaning Mode

To enable the Auto Clean function, you must have a slot designated for the
cleaning tape cartridge. If you or another user have already designated a slot, that
slot's number appears next to Cleaning Cartridge Location. If a slot has not been
designated, the box is empty.
To set the cleaning tape slot:
1. On any Web Administration page, click Configurations.
2. From the drop-down list next to Cleaning Cartridge Location, select the
3. Click submit.
Figure 76: Cleaning Tape
If you want to set the Auto Clean option, use the following procedure. To clean the
tape drive manually, use the Move function to load and unload the cleaning tape
from the tape drive.
84
number of the slot in which you want to store the cleaning cartridge.
1/16 Tape SuperLoader Reference Guide