Dependencies And Requirements; Storage Requirements; Ip Networking And Setup Requirements; Deploying The Nas 1000S On The Network - HP StorageWorks NAS 1000s Quick Start Manual

Dependencies and Requirements

Specific conditions must be met in order for the NAS 1000s to
operate.

Storage Requirements

To protect against data loss from hard drive failure, configure
storage with fault tolerance in mind. HP recommends adhering to
RAID5 configurations.

IP Networking and Setup Requirements

The following are IP networking and setup requirements needed
for a NAS 1000s device:
■ Windows-based PC running Microsoft Internet Explorer 5.5
(or later) on the same network segment as the NAS 1000s;
this will be used to set up and administer the NAS device.
■ Additional Ethernet connection ports to client subnets
(depending on network options ordered).

Deploying the NAS 1000s on the Network

The default shipping configuration contains two 10/100/1000
integrated network interface controller (NIC) ports for client data
access. These data ports also allow access to the Web user
interface (WebUI) that accompanies the product. Most
management and administrative procedures can be accomplished
via the WebUI.
20 NAS 1000s Quick Start Guide