Configuring The Library; Configuring The Ip Address; Figures - HP StorageWorks ESL E-Series Installation Manual

4

Configuring the library

This chapter includes the following sections:
• Configuring the IP

Configuring the IP address

1. Make sure the library is powered up. If not:
a. Press the power button located behind the laptop tray on the front of the library (see
Figure
b. After several minutes, verify that the current state of the library appears in the System
State display on the front panel ("System On-line" or "System Off-Line").
2
1 Power button
Figure 58 Powering up the library
address, page 73
58.
1
2 Laptop tray
ESL E-Series Tape Library unpacking and installation guide 73