6 - Maintenance
Nozzle Holder Assembly
If leaks of fluid occur in the nozzle holders on the spray boom, it is necessary to check the sealing. To locate the gaskets
disassemble the nozzle holder.
Recommendation is occasional maintenance of the gaskets and nozzle holders.
Usually is poor sealing caused by:
• Missing O-rings.
• Damaged or incorrectly seated O-rings.
• Dry or deformed O-rings.
• Foreign objects.
In Case of Leaks
Disassemble the nozzle holder and check condition of the O-rings. Replace, if damaged or cracked.
Disassemble Nozzle Holders
1. Example of an assembled nozzle holder, fitted to the spray boom.
2. Snapped together are the black plastic parts. To disassemble, insert
a flat screwdriver (B) and press, until the locking piece (A) snaps
out.
138