Operating The Control Units While Spraying - Hardi NAVIGATOR Classic EAGLE 3000 Instruction Book

Operating the Control Units While Spraying

÷
NOTE! For further explanation, please refer to the HC 5500 instruction book.
HC 5500 Controls
1. Navigation keys.
2. Volume rate.
3. Actual driving speed.
4. Actual tank contents.
5. Area covered for active register.
6. Spray volume used.
7. Remaining spray distance with actual tank contents.
8. Automatic spray pressure regulation.
The regulation valve controls the main spray pressure. This is
default selection when the controller is powered ON, and it should
remain here during normal spraying.
Spray III Controls
9. Power ON/OFF. Turns the HC 5500 and SprayBox power on or off.
10. Manual spray pressure regulation.
During normal spraying, this switch should not be used, as the
regulation valve does this automatically.
11. Main spray ON/OFF. Turns all sections on or off.
• The switch is in up position: OFF.
• The switch is in down position: ON.
12. Optional function (A/OFF/B). If adding extra equipment, control it
from here. Middle position is OFF.
• The switch is in position A: Option A switched ON.
• The switch is in middle position: OFF.
• The switch is in position B: Option B switched ON.
13. End nozzle (Left/OFF/Right). If fitted, turn on end nozzles for each side. Middle position is OFF.
• The switch is in left position: Left wing end nozzle switched ON.
• The switch is in middle position: End nozzles are OFF.
• The switch is in right position: Right wing end nozzle switched ON.
14. Foam marker blob interval. Foam marker equipment is not included from HARDI.
15. Foam marker (Left/OFF/Right). Foam marker equipment is not included from HARDI.
16. Distribution valves for the spray boom. Turns separate spray sections On or Off.
• The switch is in up position: OFF.
• The switch is in down position: ON.
5 - Operation
91