Mechanical Connections
Drawbars
There is a choice between high and low hitch drawbar versions with different coupling parts.
All drawbars are fastened to the underside of the sprayer near the rear axle with 6 bolts secured by lock nuts. Furthermore
the drawbar is supported by 2 bolts secured with lock nuts located in the area below the platform.
Following drawbar hitches are available for both high and low tractor hitch points.
A. Low D50/33 swivel
B. Low D50 hitch
C. Low K80 Zugkugel
D. Low D40 Zugmaul
E. High K80 Zugkugel
F. High D40 Zugmaul
Centering of Fixed Drawbar
For high hitch only.
Make sure the drawbar points straight ahead from its position on the
trailer. If not, adjust the two turnbuckles (A) to centre the drawbar.
1. Loosen the counternuts (B).
2. To position the drawbar, measure the length to be equal for the
two turnbuckles (A).
3. Turn the turnbuckles (A), until the measure is correct.
4. Retighten the counternuts (B) again.
4 - Sprayer Setup
73