Update The I-8124W's Firmware - ICP DAS USA I-8124W User Manual

2.6 Update the I-8124W's firmware

Generally, it is not necessary to update the firmware of I-8124W. If you
need some special functions or there is a bug in firmware, it may be needed.
When users want to download the new firmware into the I-8124W, they could
achieve it by the following description.
A. Preparing the I-8120W Software Utility. (i8120w_utility.exe)
The users could download form the FTP below.
For WinCE 5
ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/can/slotmodule/i_8120w/tools/wince5/
For WinCE 6
ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/can/slotmodule/i_8120w/tools/wince6/
For XPe
ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/can/slotmodule/i_8120w/tools/xpe/
B. Preparing the new I-8124W firmware. (8124Vxx.exe) (xx is version No.)
The users could download form the FTP below.
ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/devicenet/master/i-8124w/firmware/
C. Configuring the jumpers of I-8124W
The users should unlock the flash protection jumper shown below.
I-8124W DeviceNet Master API functions User's Manual (V 1.6)
2021/10/04 26