Advertisement
3.【Update Procedure】
< Important Notes >
1. Ensure that you perform a backup of any important files, before attempting to update
the OS image.
2. DO NOT power off or reboot the controller while the OS image is being updated, as this
may result in the OS image becoming corrupted, which may cause the controller to
malfunction.
(1)
Turn on the power
displayed.
(2) Move the rotary switch to position 0, as show in Fig. 7, and the OS Image will begin
loading from the SD card, as illustrated in Fig. 8, then monitor the upload process.
Fig. 7 Move the rotary switch to position 0
to the LP-8x4x, and the screen illustrated in Fig. 6 will be
Fig. 6 Burning screen
Fig. 8 Loading the OS Image
6
ICP DAS
Advertisement
