Advertisement
3.【Update Procedure】
(1)
To turn on the power
automatically. The recovery process may spend 4 ~ 5 minutes.
(2) If loading the Linux OS successfully, the LED "RUN" status will be turned on.
Status of "RUN" LED is
, and "PWR" LED is green.
(3) After the recovery process completed, user can
microSD
card.
(4)
Turn on the
power, LinPAC will startup, and the total process is completed
Ethernet cable, VGA cable and USB keyboard to the LinPAC, user will see the below
screen:
Fig.5 Login LinPAC
to the LinPAC, and the Linux OS would be installed from microSD
LP-8x2x
red
LP-9x2x
Status of "RUN" LED is
turn off the power
Fig.6 Boot sequence completely
5
ICP DAS
green
and
remove the
Connect
.
Advertisement
