Installing The Via Emio-8570 4G Lte & Gps M.2 Module Kit; Figure 66: Installing Via Emio-8570 Module; Figure 67: Installing The Antennas And Connecting The 4G Main Antenna (Via Emio-8570 ) - VIA Technologies EPIA-M930 User Manual

A.3 Installing the VIA EMIO-8570 4G LTE & GPS M.2
Module Kit
Step 1
Insert the standoff included in M.2 screw pack into the hole closest to the M.2 slot. Align the notch on the VIA
EMIO-8570 module with the counterpart on the M2_B_2280_1 slot. Then insert the module at a 30° angle.
Align the mounting hole on the VIA EMIO-8570 module with the mounting hole-on the standoff, and then
secure the VIA EMIO-8570 module in place with one of the screws included in the M.2 screw pack.

Figure 66: Installing VIA EMIO-8570 module

Step 2
To assemble the 4G Main antenna, place the washer over the threaded end of the antenna cable, add the
washer, fasten it with the nut, and install the external antenna. Connect the other end of the 4G Main antenna
cable to the micro-RF connector (I-PEX), labeled "M" on the VIA EMIO-8570 module.

Figure 67: Installing the antennas and connecting the 4G Main antenna (VIA EMIO-8570 )

Note:
If the second LTE antenna is required, follow the steps above and connect the DIV antenna cable to the micro-RF
connector (I-PEX), labeled "D" on the VIA EMIO-8570 module.
VIA EPIA-M930 User Manual
2
1
3
52